td62502,503,504fn 2001-07-04 1 toshiba bipolar digital integrated circuit silicon monolithic td62502fn,TD62503FN,td62504fn 7ch single driver: common emitter td62502, 503, 504fn : common emitter the td62502fn, TD62503FN and td62504fn are comprised of seven or five npn transistor arrays. applications include relay, hammer, lamp and display (led) drivers. features output current (single output) 200ma max. high sustaining voltage output 35v min. inputs compatible with various types of logic. td62502fn : r in = 10.5 k ? + 7v zener diode14~25 v p ? mos TD62503FN : r in = 2.7 k ? ttl, 5 v c ? mos td62504fn : r in = 10.5 k ? 6~15 v p ? mos, c ? mos package type : ssop ? 16 pin (0.65 mm pitch) pin connection (top view) schematics (each driver) td62502fn TD62503FN td62504fn TD62503FN r1 = 2.7 k ? *: the input and output parasitic diodes cannot be used td62504fn r1 = 10.5 k ? us clamp diodes. weight: 0.07 g (typ.)
td62502,503,504fn 2001-07-04 2 maximum ratings (ta = 25c unless otherwise noted) characteristic symbol rating unit collector ? emitter voltage v ceo 35 v collector ? base voltage v cbo 50 v collector current i c 200 ma / ch input voltage v in ? 0.5~30 v power dissipation p d (note 1) 0.78 w operating temperature t opr ? 40~85 c storage temperature t stg ? 55~150 c note 1: on glass epoxy pcb (50 50 1.6 mm, cu 40%) recommended operating conditions (ta = ? 40 ~ 85c) characteristic symbol condition min typ. max unit collector ? emitter voltage v ceo 0 D 35 v collector ? base voltage v cbo 0 D 50 v collector current i c 0 D 150 ma / ch input voltage v in 0 D 25 v power dissipation p d (note 1) on pcb D D 0.325 w note 1: on glass epoxy pcb (50 50 1.6 mm, cu 40%) electrical characteristics (ta = 25c unless otherwise noted) characteristic symbol test cir ? cuit test condition min typ. max unit output leakage current i cex 1 v ce = 35v, v in = 0 v D D 10 a i in = 1 ma, i c = 10 ma D D 0.2 collector ? emitter saturation voltage v ce (sat) 2 i in = 3 ma, i c = 150 ma (note 1) D D 0.8 v dc current transfer ration h fe 2 v ce = 10 v, i c = 10 ma 50 D D td62502fn 13 17 23 TD62503FN 2.4 3.4 4.2 input voltage td62504fn v in (on) 3 i in = 1 ma, i c = 10 ma 7.5 11.5 15 v turn ? on delay t on D 50 D turn ? off delay t off 4 v out = 35 v, r l = 220 ? c l = 15 pf D 200 D ns note 1: except td62502fn
td62502,503,504fn 2001-07-04 3 test circuit 1 . i cex 2. h fe , v ce (sat) 3. v in (on) 4. t on , t off note 1: pulse width 50 s, duty cycle 10% output impedance 50 ? , t r 5 ns, t f 10 ns note 2: see below input condition type number r i v ih td62502fn 0 ? 15 v TD62503FN 0 ? 3 v td62504fn 0 ? 10 v note 3: c l includes probe and jig capacitance precautions for using this ic does not integrate protection circuits such as overcurrent and overvoltage protectors. thus, if excess current or voltage is applied to the ic, the ic may be damaged. please design the ic so that excess current or voltage will not be applied to the ic. utmost care is necessary in the design of the output line, v cc and gnd line since ic may be destroyed due to short ? circuit between outputs, air contamination fault, or fault by improper grounding.
td62502,503,504fn 2001-07-04 4
td62502,503,504fn 2001-07-04 5 package dimensions ssop16 ? p ? 225 ? 0.65b unit: mm weight: 0.07 g (typ.)
td62502,503,504fn 2001-07-04 6 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the products described in this document are subject to the foreign exchange and foreign trade laws. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707eb a restrictions on product use
|
